Monitor Audio Platinum 200 3G Floorstanding Speaker (Pair)
The Platinum 200 3G is a slim and compact three-way floorstander, designed to deliver a rich, dynamic high-end performance with tight, controlled bass. It boasts a MPD III transducer, a 4” RDT III midrange driver and twin 6” RDT III bass drivers.
Capable of delivering levels of bass extension and detail normally only found in the largest of floorstanding loudspeakers, the Platinum 200 3G is capable of providing an exceptionally large soundstage from a relatively diminutive form. The new MPD III transducer and RDT III mid-range and bass driver cones have refined the overall balance of the speaker and reduced distortion, while also allowing it to deliver an exceptional room-filling performance. It also benefits from a new cast outrigger and crossover mounted plinth assembly.
SPECS:
System Format
3-Way
Frequency Response, Free-Field (-6dB)
32 Hz – 60 kHz
Frequency Response, In-Room (-6dB)
23 Hz – 60 kHz
Sensitivity (2.83 Vrms @ 1m, Free-Field)
88 dB
Nominal Impedance
4 Ohms
Minimum Impedance (20 Hz to 20 kHz)
4.0 Ohms @ 2.5 kHz
Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)
300 W
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal)
150 – 600 W
Bass Alignment
Ported
Port Tuning Frequency
38 Hz
Crossover Frequency
LF/MF: 825 Hz
MF/HF: 3 kHz
Drive Unit Complement
2 x 6" RDT III bass driver,
1 x 4" RDT III mid-range driver,
1 x MPD III tweeter
External Dimensions including Trims, Terminals & Outrigger Feet & Spikes (H x W x D)
1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8")
External Dimensions including Trims, Terminals & Outrigger Feet without spikes (H x W x D)
1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8")
Weight (each)
35.8 kg (78 lb 14 oz)
Original: $15,299.00
-65%$15,299.00
$5,354.65Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Platinum 200 3G is a slim and compact three-way floorstander, designed to deliver a rich, dynamic high-end performance with tight, controlled bass. It boasts a MPD III transducer, a 4” RDT III midrange driver and twin 6” RDT III bass drivers.
Capable of delivering levels of bass extension and detail normally only found in the largest of floorstanding loudspeakers, the Platinum 200 3G is capable of providing an exceptionally large soundstage from a relatively diminutive form. The new MPD III transducer and RDT III mid-range and bass driver cones have refined the overall balance of the speaker and reduced distortion, while also allowing it to deliver an exceptional room-filling performance. It also benefits from a new cast outrigger and crossover mounted plinth assembly.
SPECS:
System Format
3-Way
Frequency Response, Free-Field (-6dB)
32 Hz – 60 kHz
Frequency Response, In-Room (-6dB)
23 Hz – 60 kHz
Sensitivity (2.83 Vrms @ 1m, Free-Field)
88 dB
Nominal Impedance
4 Ohms
Minimum Impedance (20 Hz to 20 kHz)
4.0 Ohms @ 2.5 kHz
Continuous Power Handling (RMS into 4 Ohms, Pink Noise with 6dB Crest Factor)
300 W
Recommended Amplifier Power (RMS into 4 Ohm, Music Signal)
150 – 600 W
Bass Alignment
Ported
Port Tuning Frequency
38 Hz
Crossover Frequency
LF/MF: 825 Hz
MF/HF: 3 kHz
Drive Unit Complement
2 x 6" RDT III bass driver,
1 x 4" RDT III mid-range driver,
1 x MPD III tweeter
External Dimensions including Trims, Terminals & Outrigger Feet & Spikes (H x W x D)
1041.6 x 368.7 x 454.9 mm (41 x 14.5 x 17.8")
External Dimensions including Trims, Terminals & Outrigger Feet without spikes (H x W x D)
1025 x 368.7 x 454.9 mm (40.3 x 14.5 x 17.8")
Weight (each)
35.8 kg (78 lb 14 oz)
